Laser Cut acrylic light saber stand. The stand is designed to hold a 1:1 scale Star Wars Lightsaber, the Master Replicas FX lightsaber is the one shown. (lightsaber not included)
The base measures 14" L x 3.75" width, cut from 1/4" thick acrylic. The risers are 2" H x 2.5" W for the single and 6.35" tall for the 4 tier.
as an option,we offer the single saber stand to hold a saber with blade attached.
Its supports are The risers are 2" H x 2.5" W & 2.3" H x2" W, one being taller than the other to offset the balance for the blade. (this option cannot be done with the 4 tier stand.
You may choose the logo you prefer to be engraved, and any info youd like to have on the base as well.
Just type your preferences in the box provided for engrave.
Please note, we no longer stock black acrylic
Assembly required,no hardware or tools needed.
Occasionally some parts may fit into the base slightly loose. This is due to the acrylic not always being exactly the same thickness, it can be .5 mm different. You may use clear tape on the parts tab that inserts into the base. this will tighten the part
15 Reviews Hide Reviews Show Reviews
These stands are great! I’ve purchased several, both single and quad tier. Amazing quality and fast shipping
It came on time and it makes my light saber stand out in my collection.
You are getting a "clean around the edges" product, both literally and figuratively, that will showcase your light saber. My only criticism is that when you use your Force powers to pull it across the room, you need to remember to lift it up an inch or two first or you will knock over the stand. Usually this is only an issue when you are being attacked without notice, and in that case, knocking over the stand isn't really a big concern. Aside from this, it is a solid purchase, highly recommended.
I am owner and builder/designer at bespin custom props, this is my review for my purchase. very easy to deal with. Responded fast to my email request regarding custom etched saber stands the, pricing point is great too. This is also the second time I have purchased from TS Hobbies and will continue to do so for my saber runs. www.bespincustomprops.com Bombarta.
I purchased an Ultra saber at a convention I went to recently, and wanted a reasonably priced stand to put it on, since I invested a good amount in the light saber. The stand was shipped within the timeframe advertised and arrived in perfect condition and included everything I wanted. The only downside is the diameter of the semicircle cuts in the inserts (that the light saber actually sits on) were just a little too small for my lightsaber hilt. While the cut is wide enough for hilt to rest relatively secure, it doesn't fit all the way leaving a small gap between the underside of the hilt and the stand. Overall, the engraving was exactly what I requested and the stand looks great!
Excellent Saber Stand! I have now ordered two of these stands for my Saberforge lightsabers. The stands are well made and TSHobbies can etch quite a bit of logos and symbols on them. Great product and beautifully done!